Wilwood AERO6 Big Brake Lug Drive Front Brake Kit (Race)
AERO6R/ST six piston radial mount race calipers are coupled with the high cooling capacity of burnished, race-ready 15.00in dynamically mounted Lug-Drive Spec37 GT directional vane rotors to provide the ultimate brake package for unrestricted high performance competition. AERO6R/ST calipers use a forged aluminum body and feature a Type III Mil-Spec, medium gray color hard anodized finish. Hard anodizing provides superior wear resistance in the piston bores and high resistance to abrasion and corrosion throughout. This latest model of the AERO6R/ST calipers features a wider-than-standard body that accepts 20mm thick pads to add volume for longer service life. Thermlockandreg; pistons are used to reduce heat transfer from the pads to increase fade resistance and extend service life with decreased temperatures in the caliper body, fluid, and seals. Internal damper springs and controlled retraction, as well as high-temperature piston seals, assure consistent pedal height from start to finish. Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls. The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders. Spec37 alloy GT series directional vane rotors are dynamically mounted using our new Lug Drive mounting system to forged aluminum hats. As with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load-bearing surfaces. Mounting brackets, including all premium-grade fasteners, secure the calipers to the uprights in the stock location with no modifications required. This championship-proven system is completed with high-temperature, high-friction, race compound pads selected specifically by application. Installation requires the separate purchase of the stainless steel braided Flexline kits that must be ordered according to the model year.
Documents
What's Included
Wilwood's application data lists these main components for this kit:
Specifications
Fitment
Wilwood's application data for this kit.
| Minimum wheel diameter | 19" |
| Position | Front Kit |
| Years | Make | Model | Details |
|---|---|---|---|
| 2020-2025 | Chevrolet | Corvette | Stingray, Stingray |
| 2023-2025 | Chevrolet | Corvette | Z06, Z06 |
| 2025 | Chevrolet | Corvette | E-Ray, E-Ray |
| 2025 | Chevrolet | Corvette | ZR1, ZR1 |
| 2024 | Chevrolet | Corvette E-Ray | 1LZ, 1LZ |
high performance kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear.
Parts in This Kit and Recommended Lines
Frequently Asked Questions
Tap a question to see the answer.
What vehicles does this kit fit?
See the Fitment section above for Wilwood's application list for this kit.
What is the smallest wheel this kit fits?
Wilwood lists a minimum wheel diameter of 19".
Which wheel bolt pattern does it use?
Wilwood lists 5 x 4.72".
What replacement pads does it take?
Pad type 6620. The kit is listed with BP-30 pads.
How much does it weigh?
Wilwood lists the package weight at 84 lb.
Are installation instructions available?
Yes. Wilwood's installation instructions are in the Documents section above.
Not sure this is the right kit for your vehicle? Send us a message.
Always confirm your vehicle, spindles and wheel clearance before you order.
WARNING: This product can expose you to chemicals including Arsenic, Cadmium, Chromium (Hexavalent compounds), Lead, Nickel, Cobalt and Antimony Trioxide which are known to the State of California to cause cancer or other reproductive harm. For more information go to www.p65warnings.ca.gov.